Storage Rack Electrostatic Decorative Powder Coating RAL1023 Traffic Yellow Color

RAL1023 Traffic Yellow color Storage Rack Use Electrostatic Gloss Powder Coat

Advantages of Electrostatic Gloss Powder Coat:
1. Healthy and environmentally friendly.
It eliminates the harmful effects of various liquid chemical additives such as film formation, dispersion, wetting, leveling, anti-corrosion and mildew resistance added to achieve coating performance.

2, convenient transportation and storage
Ordinary coatings contain about 20-50% water or solvent, while powder coatings have neither water nor solvent. They are completely solid, convenient and safe to transport. In addition, water or solvent coatings have low transport and storage temperatures. At 0 ° C, it tends to freeze, and powder coatings do not have this problem.

3, paint smell
Compared with the traditional paint odor residue, this paint can be dissipated quickly, which can be said to be instant.

Characteristic of Electrostatic Gloss Powder Coat:
1. The product is non-toxic, free of solvents and volatile and toxic substances, so there is no pollution, no fire, no "three wastes" and other pollution problems, fully in line with the requirements of the National Environmental Protection Law.

2, the raw material utilization rate is high, its overspray powder can be recycled, the highest utilization rate can even reach more than 99%.

3. After pre-treatment of the coated object, one-time construction, without the need of primer, can obtain a coating film with sufficient thickness, easy to achieve automatic operation, high production efficiency, and can reduce cost.

4, the coating is dense, adhesion, impact strength and toughness are good, corner coverage is high, with excellent chemical corrosion resistance and electrical insulation properties.

5, powder coating storage, transportation is safe and convenient.

Application of Electrostatic Gloss Powder Coat:

1. First the part must be prepared. It must be thoroughly cleaned so that the powder coating will stick smoothly to it.There are both mechanical and chemical ways to prepare the part. Which method is used depends entirely on the type of part it is, its size, and what type of material it is made of.
2. Second, the powder is actually applied to the part. Powder is applied to most metal objects by spraying it on with an electrostatic gun. The gun gives the powder a negative electric charge, and the object is grounded. In other cases, the powder is sprayed using compressed air. There are many different nozzles that can be used, depending on the type, shape, and size of the object that is being coated in powder.
3. And finally, it is cured by being baked in an oven. The curing process in powder coating is known as crosslinking, and depending on the type of coating that is being used, it requires a specific temperature and a specific amount of time in the heat in order to reach full cure and create the properties it was designed to offer. Most powders cure around 390 degrees Fahrenheit on a 10-minute timer, however that schedule could change according to the needs and requirements of the manufacturer.

SPECIFICATION: