Nanjing Powder New Material Co., Ltd.
Nanjing Powder New Material Co., Ltd. Powder expert for 11 years
Add to Cart
RAL Color Metal Furniture Sandy Epoxy Polyester Powder Coating On Metal Finished
INTRODUCTION
RAL Color Metal Furniture Sandy Epoxy Polyester Powder Coating On Metal Finished is very popular by our clients. The rough sand finish will make the metal surface good special looking.Please contact us for this color if you need. Samples are available before ordering.
SPECIFICATION
| Main Material | Polyester resin,barium sulfate,titanium dioxide |
| Surface Type | Gloss,matte,wrinkle,sand grain,antique, Hammer,crocodile skin, wood effect,candy,chrome,transparent,semitransparent,metallic,and special pattern |
| Powder Properties | Specific gravity : 1.3 - 1.75 (depend on colors) |
| Average particle size : 35 - 45um | |
| Coating Properties | Film thickness(ISO 2178) :60 - 90 μm |
| Coverage:15㎡ based on 60μm | |
| Pencil hardness: ASTM D3363,H-2H | |
| Adhesion :GB/T 9286-1998,0 grade | |
| Bending test:GB/T 6742 ,=<2mm | |
| Cupping test:GB/T 9753,>=7mm | |
| Direct and reverse impact (ASTM D2794) : > 50kg.cm | |
| Salt spray Resistance ( ASTM B117, 1000hrs)(Maximum undercutting ,1 mm ): No blistering or loss of adhesion | |
| Heat and moisture test GB/T 1740,>=1000 hours,no change | |
| Application Schedule | Applied by : Electrostatic spraying devices |
| Curing schedule :10 minutes at 200 ℃ | |
| Advantage | Good adhesion,anti-corrosion,UV resistant, strong coating film, |
| Accurate colors, good leveling | |
| Shelf Life | 12 months
|
SUBSTRATES AND PRE-TREATMENT
In order to obtain optimal anti-corrosion properties, it is recommended to apply a chemical pretreatment
prior to powder coating application.
STORAGE
Purchase Note:
1. M.O.Q :
The minimum order is 500kg ,each color ≥ 100kg
2. Colors:
RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market
Custom color : Color matching is available , if you have colors model ,please send to us for matching .
3. Prices:
Prices depend on the colors and using environment ,for prices please tell us the colors and using environment (indoor use or outdoor use).
4. Time of delivery :
Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity .
5. Payment :
30% T/T prepayment , 70% T/T before shipment (or against BL) or LC at sight .
6. Samples:
1kg powder sample is available for each color for your testing.
Sample is free of cost,but if you pay for the air freight we will highly appreciate.