Nanjing Powder New Material Co., Ltd.
Nanjing Powder New Material Co., Ltd. Powder expert for 11 years
Add to Cart
High glossy electrostatic epoxy polyester candy green powder coat
High glossy electrostatic epoxy polyester candy green powder coat is a very popular product in the market,as it have very bright and beautiful color,like the color of colorful candy,It is based on polyester and epoxy polyester chemicals. If you would like to order this product, welcome to contact us. Samples are also available by your test.
SPECIFICATION
| Main Material | Polyester resin,epoxy resin,barium sulfate,titanium dioxide |
| Surface Type | Gloss,matte,wrinkle,sand grain,antique, Hammer,crocodile skin, wood effect,candy,chrome,transparent,semitransparent,metallic,and special pattern |
| Powder Properties | Specific gravity : 1.3 - 1.75 (depend on colors) |
| Average particle size : 35 - 45um | |
| Coating Properties | Film thickness(ISO 2178) :60 - 90 μm |
| Coverage:15㎡ based on 60μm | |
| Pencil hardness: ASTM D3363,H-2H | |
| Adhesion :GB/T 9286-1998,0 grade | |
| Bending test:GB/T 6742 ,=<2mm | |
| Cupping test:GB/T 9753,>=7mm | |
| Direct and reverse impact (ASTM D2794) : > 50kg.cm | |
| Salt spray Resistance ( ASTM B117, 500hrs)(Maximum undercutting ,1 mm ): No blistering or loss of adhesion | |
| Heat and moisture test GB/T 1740,>=800 hours,no change | |
| Application Schedule | Applied by : Electrostatic spraying devices |
| Curing schedule :15 minutes at 180 ℃ | |
| Advantage | Good adhesion,good mechanical property,strong coating film, |
| Accurate colors, good leveling | |
| Shelf Life | 12 months |
SUBSTRATES AND PRE-TREATMENT
In order to obtain optimal anti-corrosion properties, it is recommended to apply a chemical pretreatment
prior to powder coating application.
l Ferrous metals(cold rolled steel, cast iron etc.): Iron or zinc phosphatation
l Zinc surfaces(galvanized steel, zinc alloy) : Chromatation or zinc phosphatation
l Aluminum alloys : Chromatation
STORAGE
l Should be stored under dry conditions with good ventilation at a temperature not exceeding 30 C.
l Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.
l Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
l Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture.
Purchase Note:
1. M.O.Q :
The minimum order is 500kg ,each color ≥ 100kg
2. Colors:
RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market
Custom color : Color matching is available , if you have colors model ,please send to us for matching .
3. Prices:
Prices depend on the colors and using environment ,for prices please tell us the colors and using environment (indoor use or outdoor use).
4. Time of delivery :
Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity .
5. Payment :
30% T/T prepayment , 70% T/T before shipment (or against BL) or LC at sight .
6. Samples:
1kg powder sample is available for each color for your testing.
Sample is free of cost,but if you pay for the air freight we will highly appreciate.