Main Material	Polyester resin,barium sulfate,titanium dioxide
Surface Type	Gloss,matte,wrinkle,sand grain,antique, Hammer,crocodile skin, wood effect,candy,chrome,transparent,semitransparent,metallic,and special pattern
Powder Properties	Specific gravity : 1.3 - 1.75 (depend on colors)
Powder Properties	Average particle size : 35 - 45um
Coating Properties	Film thickness(ISO 2178) :60 - 90 μm
	Coverage:15㎡ based on 60μm
	Pencil hardness: ASTM D3363,H-2H
	Adhesion :GB/T 9286-1998,0 grade
	Bending test:GB/T 6742 ,=<2mm
	Cupping test:GB/T 9753,>=7mm
	Direct and reverse impact (ASTM D2794) : > 50kg.cm
	Salt spray Resistance ( ASTM B117, 1000hrs)(Maximum undercutting ,1 mm ): No blistering or loss of adhesion
	Heat and moisture test GB/T 1740,>=1000 hours,no change
Application Schedule	Applied by : Electrostatic spraying devices
Application Schedule	Curing schedule :10 minutes at 200 ℃
Advantage	Good adhesion,anti-corrosion,UV resistant, strong coating film,
Advantage	Accurate colors, good leveling
Shelf Life	12 months

SUBSTRATES AND PRE-TREATMENT

In order to obtain optimal anti-corrosion properties, it is recommended to apply a chemical pretreatment

prior to powder coating application.

Ferrous metals(cold rolled steel, cast iron etc.): Iron or zinc phosphatation
Zinc surfaces(galvanized steel, zinc alloy) : Chromatation or zinc phosphatation
Aluminum alloys : Chromatation

STORAGE

Under dry conditions ,good ventilation at a temperature not exceeding 30 C,humidity < 60%.
Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.
Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture

Purchase Note:

1. M.O.Q :

The minimum order is 500kg ,each color ≥ 100kg

2. Colors:

RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market

Custom color : Color matching is available , if you have colors model ,please send to us for matching .

3. Prices:

Prices depend on the colors and using environment ,for prices please tell us the colors and using environment (indoor use or outdoor use).

4. Time of delivery :

Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity .

5. Payment :

30% T/T prepayment , 70% T/T before shipment (or against BL) or LC at sight .

6. Samples:

1kg powder sample is available for each color for your testing.
Sample is free of cost,but if you pay for the air freight we will highly appreciate.

Inquiry Cart 0